HP 8712ES User Manual page 89

14. Subtract this value from the value calculated in
corresponds to the delay of the adapter.
15. Remove the short from the adapter.
16. Modify the Port 1 calibration kit definition of the through-standard by
entering the electrical delay of the female-to-female adapter. To do so:
•Press More Cal Cal Kit
CAL
the
Press Modify 3.5 mm Thru Delay
the keypad and softkeys.
17. Save (and automatically assign) the modified cal kit buffer as a
user-defined cal kit for port 1. To do so:
• Press Prior Menu Mod Kit SaveRecall
knob or the
the display's table. (In this example, highlight Cal Kit A.) Press
.
Save
If you want to enter a cal kit description in the display's table,
press
Add Kit Description
analyzer's DIN KEYBOARD connector to enter the description.
(If you don't have a keyboard, you can use the analyzer's
key to select and enter characters from the top of the analyzer's
display. Press
18. Modify the Port 2 calibration kit definition of the through-standard by
entering the electrical delay of the female-to-female adapter. To do so:
•Press More Cal Cal Kit
CAL
the
Press Modify Type-N(m)
with the keypad and softkeys.
19. Save (and automatically assign) the modified cal kit buffer as a
user-defined cal kit for port 2. To do so:
• Press Prior Menu Mod Kit SaveRecall
knob or the
the display's table. (In this example, highlight Cal Kit B.) Press
.
Save
ES User's Guide
Measuring S-Parameters using a Two-Port Calibration
and use the front panel knob or
keys to highlight Port 1 in the display's table.
keys to highlight the desired User Kit in
. Use a keyboard connected to the
keys or the front panel knob and the
Enter
when done.)
and use the front panel knob or
keys to highlight Port 2 in the display's table.
Thru
keys to highlight the desired User Kit in
Making Measurements
Step 12. This
. Enter the delay value with
. Use the front panel
Select Char
Delay . Enter the delay value
. Use the front panel
3-37