HP 8712ES User Manual page 311

A
A/R
Abort
Abort Kit
Active
Marker Off
A
Softkey in the narrowband internal menu. Selects the tuned receiver
measurement of input A.
See "Measuring Devices with Your Network Analyzer" on page 3-3
more information on input A.
Access keys:
MEAS 1
Narrowband Internal
Softkey in the narrowband internal menu. Selects the tuned receiver
reflection measurement A/R.
See "Measuring Devices with Your Network Analyzer" on page 3-3
more information on measuring A/R.
Access keys:
MEAS 1
Narrowband Internal
Softkey in the
HARDCOPY
network analyzer to the hardcopy device.
NOTE
Softkey in the modify kit menu. Stops the current calibration kit
modification procedure and returns to the cal kit menu.
Access Keys: CAL
Modify (connector type)
Softkey in the marker menu that turns off the active marker and
makes the lowest numbered marker (if any) the active marker.
See "Using Markers" on page 4-3
and for more information on using markers.
Access Keys: MARKER
ES User's Guide
or , More Detection Options
MEAS 2
or , More Detection Options
MEAS 2
menu. Stops sending data from the
Hardcopy devices with large buffers may continue
to operate for quite a while after this command.
To stop such devices immediately, turn off power
to the hardcopy device.
More Cal Cal Kit
for an explanation of "active marker,"
More Markers
Hardkey/Softkey Reference
for
for
8-5
A