HP 8712ES User Manual page 376

Recall Line
Recall Program
Recall State
Reference Level
Reference
Position
Reference
Tracking
Reflection
Hardkey/Softkey Reference
R
Softkey in the IBASIC edit menu.
Access Keys:
SYSTEM OPTIONS
Softkey in the programs menu. Recalls to the network analyzer a
program from internal memory, internal disk, or external disk.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SAVE RECALL
Softkey in the
SAVE RECALL
(not plot files) from internal memory or a floppy disk.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Softkey in the
SCALE
reference value is noted on the screen as "Ref".
Softkey in the
SCALE
from the top of the graticule (10) to the bottom (0) or in between.
Default position is middle (5).
See Figure 2-3 on page
Softkey in the
SCALE
frequency or the peak point of the measurement trace by scaling the
trace such that the point of interest always falls on the display
reference line.
See "Using Reference Tracking" on page 4-42
(Option 100 only) Softkey in the cable menu. Selects the S
reflection) type of measurement.
See "Using the BEGIN Key to Configure Measurements" on page 3-16
for more information.
Access Keys:
BEGIN
8-70
IBASIC
Programs
menu. Recalls instrument state files
menu. Sets the value of the reference line. The
menu. Sets the position of the reference line
2-7.
menu. Allows you to track either a certain
Cable
Edit
for
for more information.
(forward
11
ES User's Guide