HP 8712ES User Manual page 394

System Config
System
Controller
SYSTEM
OPTIONS
System Z0
Hardkey/Softkey Reference
S
Softkey in the SYSTEM OPTIONS
adjust the clock setting, set the beeper volume, adjust the CRT
settings, and configure the rear panel USER TTL IN/OUT port.
Softkey in the HP-IB menu. Makes the network analyzer the system
controller of the HP instrument bus. Required mode for interfacing
with HP-IB peripherals (printers, plotters, and disk drives). Also
required by IBASIC to talk to HP-IB peripherals. This operation mode
is not selectable with another active controller on the bus.
See the Programmer's Guide for more information.
Access Keys:
SYSTEM OPTIONS
Hardkey in the SYSTEM area of front panel.
Softkey in the cal kit menu. Provides access to the system impedance
menu.
Refer to "When to Change the System Impedance" on page 3-12
more information.
Access Keys:
CAL
8-88
menu. Displays the menu to
HP-IB
More Cal
for
ES User's Guide