HP 8712ES User Manual page 31

NOTE
To Configure
Peripheral
Settings
NOTE
NOTE
probably not necessary. To change the recognized
address, press
Enter
Only one hardcopy HP-IB address can be set at a time. Changing the
printer address, for example, changes the plotter to the same address.
Analyzer: Press
HP 8712ES Address
The network analyzer's address will appear (the
default is 16). To change the address, press
Enter
If your system uses serial or parallel peripherals, follow the guidelines
below to configure the system. Refer to the peripheral's manual for
correct cables and settings. The parallel and serial ports have standard
Centronics DB-25 and RS232 pinouts respectively as explained in
Chapter 7.
Serial
Devices: Press
entry controls to highlight your type of printer or
plotter, and press
handshake at the top of the screen are incorrect, use
the softkeys to change them.
Parallel
Devices: Press
entry controls to highlight your type of printer or
plotter, and press
LAN
Printer: Press
entry controls to highlight HP LaserJet PCL5/6
PCL5 LAN, and press
address at the top of the screen is incorrect, press
LAN Printr IP Addr
When Select Copy Port
the top of the display screen show the current settings.
Use a PCL5 printer for fastest hardcopies. See
Port" on page 4-71for more information.
ES User's Guide
Print/Plot HP-IB Addr
.
SYSTEM OPTIONS
, or
.
Select Copy Port
HARDCOPY
Select . If the baud rate or
Select Copy Port
HARDCOPY
Select .
Select Copy Port
HARDCOPY
Select
to enter the correct IP address.
is selected, the first two lines in the box at
Installing the Analyzer
Step 4. Configure the Analyzer
number
HP-IB ,
HP 8714ES Address
number
. Use the
Use the
.
. Use the
. If the printer IP
"Configure the Hardcopy
.
1-15