HP 8712ES User Manual page 390

Spur Avoid
Options
SRL
Stack Size
Start
Start Line #
Start Power
Hardkey/Softkey Reference
S
Softkey in the source
dither, spur avoid, or none.
(Option 100 only) Softkey in the cable or measurement menus. Selects
the structural return loss (SRL) measurement. See your Option 100
User's Guide Supplement for information.
Access Keys:
BEGIN
Softkey in the utilities menu. Allows you to set the number of bytes in
the stack size by using the analyzer's numeric keypad.
Access Keys: SYSTEM OPTIONS
Softkey in two menus:
1. In menu, sets the start frequency of the source. Minimum
FREQ
frequency is 300 kHz. When start is selected, the other frequency
parameter that must be defined is stop.
See "Entering Measurement Parameters" on page 2-4
information.
2. In
HARDCOPY
port menu.
See "Printing and Plotting Measurement Results" on page 4-78
more information.
Softkey in the secure menu that is used with the IBASIC feature of the
instrument.
See the HP Instrument BASIC User's Handbook for information on the
secure function.
Access Keys:
SYSTEM OPTIONS
Softkey in the
POWER
power sweep measurement.
must be selected before setting the start and stop power points.
See the Power Sweep
the power sweep function.
8-84
MENU . Displays selections for spur avoidance:
Cable or
MEAS 1
IBASIC
and
FREQ HARDCOPY
menu, starts print or plot as set in the select copy
IBASIC
menu. Sets the starting point (in dBm) for a
Power Sweep
entry in this chapter for more information on
or
MEAS 2
Utilities
.
for more
Utilities Secure
in the menu
SWEEP
ES User's Guide
for