HP 8712ES User Manual page 49

Figure 2-9 Verify S
7. Press
8. Press
9. Verify that the data trace falls completely below −16 dB. See
10. Disconnect the cable and connect a known good load to port 2 as
ES User's Guide
Reflection Measurement
11
MEAS 1
S22 Refl Port2
Default 1-Port
CAL
Figure 2-9 for a typical HP 8714ES result. (Although this figure is
from an S measurement, the results of your S
11
should look similar.) The HP 8712ES should look similar, but will end
at 1300 MHz.
shown in Figure 2-10.
Performing the Operator's Check
.
.
measurement
22
Getting Started
2-15