To Set Up A Printer; To Perform A Power Calibration - HP 86140A Series User Manual

To set up a printer

1 Press the front-panel System key.
2 Press the Printer Setup.... softkey. The Printer Setup panel appears.
Setup panel
selections

To perform a power calibration

1 Press the front-panel System key.
2 Press the Calibration.... softkey.
3 Press the Power Cal Setup.... softkey. The Power Calibration Setup panel appears.
Using the Optical Spectrum Analyzer
The System Menus
Active Function Area Assist
When this function is
matically set to the first, or top, softkey function. For example, when you
press the front-panel Bandwidth/Sweep key, the Active Function Area Assist
function will set the Active Function Area to resolution bandwidth. This
means you can immediately enter the desired resolution bandwidth. There is
no need to press the Res BW softkey.
The Printer Setup panel
Printer Location
Selects either the internal printer or an external printer as the print destina-
tion.
The Power Calibration setup panel
3-44
, the function set in the Active Function Area is auto-
ON