HP 8712ES User Manual page 384

Scale/Div
SCPI Sock.
Setup
Search Left
Search Off
Search Right
Seconds ON off
Hardkey/Softkey Reference
S
Softkey in the SCALE
graticule. For example, if the scale/div is 10 dB, each graticule line is
10 dB higher than the one below.
Softkey in the LAN menu. Displays the menu to set up the socket port
number. This socket port number is used for making socket
connections to the analyzer for SCPI socket programming.
See The LAN Interface User's Guide Supplement for more information.
Softkey in the target search menu. During a target search, moves the
active marker to the left (lower frequency) to the first occurrence on the
data trace where the amplitude equals the target value. That first
occurrence may be an actual data point or an interpolated value.
See "To Use Marker Search Functions" on page 4-7
how to use the target search function.
Access Keys: MARKER
Softkey in marker search more menu. Disables marker search.
See "Using Markers" on page 4-3
marker search functions.
Access Keys:
MARKER
Softkey in the target search menu. During a target search, moves the
active marker to the right (higher frequency) to the first occurrence on
the data trace where the amplitude equals the target value. That first
occurrence may be an actual data point or an interpolated value.
See "To Use Marker Search Functions" on page 4-7
how to use the target search function.
Access Keys:
MARKER
Softkey in the clock format menu. Toggles on and off the seconds
annotation that is displayed or printed as part of the clock.
Access Keys:
SYSTEM OPTIONS
Clock Format
8-78
menu. Sets the value of vertical divisions of
Marker Search
for more information on using
Marker Search
Marker Search
System Config
for an example of
Target Search
More
for an example of
Target Search
Set Clock
ES User's Guide