HP 8712ES User Manual page 380

Restore
Defaults
RF Filter Stats
RF ON off
Round Seconds
Run
Hardkey/Softkey Reference
R
Softkey in several
SICL LAN setup menu, and the SCPI sock. setup menu.
If this key is pressed in the
such as addresses, baud rates, handshakes, color, pens, resolution, and
margins to predetermined values.
See "Printing and Plotting Measurement Results" on page 4-78
more information on using the
If this key is pressed in the CRT adjustment menu, it restores the
default CRT timing values.
If this key is pressed in the SCPI sock. setup menu or the SICL LAN
setup menu, it resets the socket port number or the HP-IB device
address, HP-IB logical unit number, and HP-IB name, respectively, to
predetermined values.
See The LAN Interface User's Guide Supplement for more information.
Softkey in the marker math menu. Measures both the passband and
stopband of a filter in one sweep.
See "To Use Marker Math Functions" on page 4-18
information.
Access Keys:
MARKER
Softkey in the
POWER
on. Default is on.
Softkey in the set clock menu. Rounds off seconds to the nearest
minute. Rounds down with less than 30 seconds; rounds up to next
minute with more than 30 seconds.
Access Keys:
SYSTEM OPTIONS
Softkey in the IBASIC menu that starts a program.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SYSTEM OPTIONS
8-74
HARDCOPY menus, the CRT adjust menu, the
HARDCOPY
HARDCOPY
Marker Functions
menu. Turns the internal RF source off and
System Config
IBASIC
menus, it resets parameters
menus.
for more
Marker Math
Set Clock
ES User's Guide
for