HP 8712ES User Manual page 382

S22 Refl Port2
Saturation
Save ASCII
Save AUTOST
Hardkey/Softkey Reference
S
Softkey in the amplifier, broadband passive, and measurement menus.
Selects the S (reverse reflection) type of measurement. Power is
22
output from the analyzer's port 2 and also measured there.
See "Measuring S11 Reflection Port 1 using a One-Port Calibration" on
page 3-48 for more information on a similar (S
Access Keys: MEAS 1
Broadband Passive
Softkey in the custom colors menu. Use this key to customize the colors
of display items on your external monitor. Saturation is the amount of
pure color (selected with the
Saturation values are expressed as a percentage: 0 to 100%, with 0
representing no color, and 100 representing no white.
See "Using an External VGA Monitor" on page 4-87
information.
Access Keys:
DISPLAY
Custom Colors
Softkey in the define save menu. Selects which measurement channel's
(1 or 2) trace data is to be saved in ASCII format for output. Also
allows you to choose whether to save in Lotus 123 or Touchstone
format for spreadsheet use.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Access Keys:
SAVE RECALL
Softkey in the programs menu. Titles the current program AUTOST
and saves it to internal RAM or a 3.5" disk as set by
power-up, the network analyzer searches the internal non-volatile
RAM disk and the floppy disk in the analyzer's built-in disk drive for
an AUTOST (auto-start) file, loads it, and executes it if present.
Access Keys:
SAVE RECALL
8-76
or MEAS 2 . Also
Hue key) to be mixed with white.
More Display Color Options
Define Save
Programs
) measurement.
11
Amplifier
BEGIN ,
for more
for
Select Disk
ES User's Guide
or
. At