HP 8712ES User Manual page 392

Store CC
To EPROM
Subnet Mask
SWEEP
Sweep Out
Sweep Time
Sweep Time
AUTO man
Hardkey/Softkey Reference
S
Softkey in the update correction constants menu. Writes a copy of CC
data from internal volatile RAM to EPROM. This function is used so
that current CC data is not lost when power to the analyzer is turned
off.
See the Service Guide for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the LAN port setup menu. Allows you to enter the numbers
that your network administrator assigned to your analyzer. If you were
not assigned a subnet mask, leave the setting at 0.0.0.0 (default value)
to disable subnet masking.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
Hardkey in the SOURCE area of the front panel. Displays the menu to
select automatic sweep time (fastest possible), manual sweep,
alternate sweep, or power sweep.
Softkey in the user TTL config menu. Sets the USER TTL IN/OUT port
on the rear panel to be pulled to a high TTL level during a sweep.
See "Analyzer Connectors—Rear Panel BNC Connectors" on page 7-4
for more information.
Access Keys: SYSTEM OPTIONS
User TTL Config
Softkey in the
SWEEP
possible to three days (259.2 ks); overrides auto sweep time. Fastest
possible sweeptime varies, and depends on other analyzer settings.
See Chapter 5 for more information on sweep time.
Softkey in the
SWEEP
fast as possible (automatic) or at the sweep time of your choice
(manual).
See Chapter 5 for more information on sweep time.
8-86
Service
LAN LAN Port Setup
System Config
menu. Sets the sweep time from fastest
menu. Sets the network analyzer to sweep as
Update Corr Const
ES User's Guide