HP 8712ES User Manual page 404

Vertical
Position
Volatile
RAM Disk
Hardkey/Softkey Reference
V
Softkey in the CRT adjust menu. Changes the vertical positioning of
the display on both the internal CRT and an external monitor. Accepts
whole number values from 1 to 100, with 1 representing as far up as
possible and with 100 representing as far down as possible. The default
value set at the factory (and obtained by pressing
Restore Defaults
instrument preset.
See "Using an External VGA Monitor" on page 4-87
information on using an external display.
Access Keys:
SYSTEM OPTIONS
Softkey in the select disk menu. Selects the analyzer's internal volatile
RAM as the place where information will be saved to or recalled from.
CAUTION
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Access Keys:
SAVE RECALL
8-98
) is 74. This setting is not affected by an
System Config
Any information stored on the volatile RAM disk
will be lost if the analyzer's power is turned off.
Select Disk
for more
CRT Adjust
for
ES User's Guide