HP 8712ES User Manual page 339

Format
Vol RAM
FREQ
Freq Annot
ON off
Frequency
Frequency
Sweep
FTP
Softkey in the format disk menu. Formats the internal volatile RAM
disk.
CAUTION
Access Keys:
SAVE RECALL
Hardkey in the SOURCE area. Displays the frequency menu which
allows you to enter the frequency range for your measurement. Also
allows you to change the resolution of the displayed frequency.
See "Entering Measurement Parameters" on page 2-4
of how to enter frequency range.
Softkey in the annotation options menu. Toggle ON if you want to view
the frequency annotation at the bottom of the display.
See "Customizing the Display" on page 4-45
Access Keys: DISPLAY
Softkey in the add max point and add min point menus. Sets the
frequency of a limit point.
See "To Create a Single Point Limit" on page 4-32
how to set a limit point.
Access Keys:
DISPLAY
Add Max Point or
Softkey in the
SWEEP
to frequency sweep mode, after it has been used in power sweep mode.
Softkey in the BOOTP setup menu. Selects FTP as the file transfer
protocol used to transfer a boot file from a BOOTP server to the
analyzer.
See The LAN Interface User's Guide Supplement for more information.
Access Keys:
SYSTEM OPTIONS
ES User's Guide
Formatting the internal volatile RAM disk erases
all existing files and directories on the disk.
File Utilities
More Display Annotation Options
Limit Menu
Add Min Point
menu. This key is used to return the analyzer
LAN
Hardkey/Softkey Reference
Format Disk Menu
for an example
for more information.
for an example of
Add Limit
BOOTP Setup
F
8-33