HP 8712ES User Manual page 349

Insert Line
Inst State
ON off
Install CC
From Disk
Instrument Info
Int Disp
Intensity
Internal
Softkey in the IBASIC edit menu. Invokes the insert line menu for
editing IBASIC programs.
See the HP Instrument BASIC User's Handbook Supplement for more
information.
Access Keys:
SYSTEM OPTIONS
Softkey in the define save menu. When on, allows you to save the
instrument state.
See "Saving and Recalling Measurement Results" on page 4-55
more information.
Access Keys:
SAVE RECALL
Softkey in the update correction constants menu. Loads a permanent
copy of CC data from a floppy disk to internal EPROM. This must be
done after loading new firmware into the analyzer.
See the Service Guide for more information.
Access Keys:
SYSTEM OPTIONS
Softkey in the service menu. Displays the analyzer's firmware revision
and date, bootROM version, serial number, options, system impedance,
and amount of memory.
Access Keys:
SYSTEM OPTIONS
Softkey in the custom colors menu. This key only affects the analyzer's
internal display. This key changes the brightness of the selected
display item. Values accepted are 0 to 100%, with 0 resulting in black
(not visible) and 100 resulting in full brightness.
Access Keys: DISPLAY
Custom Colors
Softkey in the trigger source menu. Selects an automatic, internal
trigger.
Access Keys:
MENU
ES User's Guide
IBASIC
Define Save
Service
Service
More Display Color Options
Trigger Trigger Source
Hardkey/Softkey Reference
Edit
for
Update Corr Const
I
8-43