Printing Measurement Results - Keysight Technologies 86120B User Manual

Printing Measurement Results

Measurement results can be sent directly to a printer. Simply connect a compatible
printer to the rear-panel PARALLEL PRINTER PORT connector. The output is
ASCII text. An example of a compatible printer is Hewlett-Packard
series printer. Be sure to use a parallel printer cable to connect the printer.
The printer output is not a copy of the display. Rather, it is a listing of all signals
present at the input (up to 100). The measurement values printed depend on the set-
tings of the instrument when the Print key is pressed.
The following is an example of a typical printout:
Agilent 86120B SER US36151025
Firmware Ver. 2.000
List By Wavelength
8 Lines
Power Offset 0.0 dB
Vacuum
Elevation 0 Meters
Update Normal
Peak Excursion 15 dB
Peak Threshold 10 dB
Device Narrow
Input
Wavelength
----------- ----------
1280.384nm -16.97dBm
1281.473
1282.569
1283.651
1284.752
1285.840
1286.944
1288.034
To create a hardcopy
1 Connect the printer to the Agilent 86120B's rear-panel PARALLEL PRINTER
PORT connector.
2 Press Print.
1. Hewlett-Packard and LaserJet are registered trademarks of Hewlett-Packard Company.
Using the Multi-Wavelength Meter
Printing Measurement Results
's LaserJet
®
Power
-13.14
-13.92
-13.34
-11.69
-8.11
-10.38
-14.65
1
65