Keysight Technologies 86120B User Manual page 144

Query Response
Example
Programming Commands
Common Commands
The service request enable register is cleared when the instrument is turned on. The
*RST and *CLS commands do not change the register. The *SRE? query returns the
value of the service request enable register.
Table 5-17. Service Request Enable Register
Bit Bit Weight
a
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
a. High enables the status byte register bit.
<integer> from 0 to 63 or from 128 to 191.
OUTPUT 720;"*SRE 32"
In this example, the command enables ESB (event summary) bit 5 in the status byte
register to generate a service request.
142
Enables
Not Used
Not Used
Event Status Bit (ESB)
Message Available (MAV)
Not Used
Error queue status
Not Used
Not Used