Table of Contents
Advertisement
Syntax
Attribute Summary
Description
DRIFt:MINimum[:STATe]
Sets the drift calculation to return the minimum power and frequency values mea-
sured.
:CALCulate3:DRIFt:MINimum[:STATe]{?| {ON | OFF | 1 | 0}}
Preset State: off
*RST State: off
SCPI Compliance: instrument specific
Use the CALC3:DRIF:PRES command to turn off all the drift states before turning
on this state. The CALC3:DATA? query returns the minimum power or frequency.
Note
Only one STATe command can be turned on at any one time. Attempting to turn
more than one state on at a time results in a "–221 Settings Conflict" error.
Refer to "Measure delta, drift and signal-to-noise" on page 94
information on selecting measurements.
Programming Commands
CALCulate3 Subsystem
for additional
187
Advertisement
Table of Contents
