Measurement Related Tasks and Concepts
Viewing Measurement Results
Viewing Measurement Results
Displaying the Measurement Results
The analyzer features a color display and a comprehensive set of display
features to allow you to analyze the measurement results in detail, or to quickly
obtain a pass/fail indication.
The following display features are available:
— Graph, Table, or Meter mode display
— Single or dual-graph display allowing any two available result types to be
— Zoom to display only one result graph on the display
— Markers for searching a trace, and for displaying point data more accurately
— Save the current active trace data to internal memory
— Switch the graticule on or off
— Switch the annotation on the measurement bar, screen, trace, and active
Selecting the Layout
You can display the measurement results in either:
— Graph format
— Table format
— Meter format
The default view provides a display of noise figure and gain on the dual-graph
display. The upper graph is noise figure and the lower graph is gain.
In all formats you can choose two result parameters you want to display.
To set the display format, press Display, Layout and then select Graph, Table,
or Meter to select the display mode you want.
Navigating Around the Display
The active graph is highlighted by a blue border. noise figure is the active
graph by default.
82
displayed simultaneously
than can be done with a trace alone
function on or off
N9069C Noise Figure Measurement Guide