Syntax
Attribute Summary
Description
Programming Commands
HCOPy Subsystem
HCOPy Subsystem
Use the command in this subsystem to print the displayed measurement results to a
printer. This subsystem has the following command hierarchy:
:HCOPy
[:IMMediate]
[:IMMediate]
Prints measurement results on a printer.
:HCOPy:IMMediate
Preset State: none
*RST State: none
SCPI Compliance: standard
Command Only
Connect the printer to the Keysight 86120B's rear-panel PARALLEL PRINTER
PORT connector. The output to the printer is ASCII text.
MEASure Measurement Instruction
For information on the MEASure measurement instruction,
Instructions" on page
200
146.
refer to "Measurement