Table of Contents
Advertisement
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
VENTILATION REQUIREMENTS: When installing the product in a
cabinet, the convection into and out of the product must not be restricted. The
ambient temperature (outside the cabinet) must be less than the maximum
operating temperature of the product by 4
the cabinet. If the total power dissipated in the cabinet is greater than
800 watts, then forced convection must be used.
Always use the three-prong ac power cord supplied with this instrument.
Failure to ensure adequate earth grounding by not using this cord may cause
instrument damage.
Do not connect ac power until you have verified the line voltage is correct as
described in
"Line Power Requirements" on page 1-16
could result.
This instrument has autoranging line voltage input. Be sure the supply
voltage is within the specified range.
General Safety Considerations
C for every 100 watts dissipated in
⋅
. Damage to the equipment
9
Advertisement
Table of Contents
