Table of Contents
Advertisement
C A U T I O N
C A U T I O N
Getting Started
Getting Started
Getting Started
The instructions in this chapter show you how to install your Keysight 86120B. You
should be able to finish these procedures in about ten to twenty minutes. After
you've completed this chapter, continue with
length
Meter". Refer to
information on operating conditions such as temperature.
Install the instrument so that the ON/OFF switch is readily identifiable and is
easily reached by the operator. The ON/OFF switch or the detachable power
cord is the instrument disconnecting device. It disconnects the mains circuits
from the mains supply before other parts of the instrument. Alternately, an
externally installed switch or circuit breaker (which is really identifiable and
is easily reached by the operator) may be used as a disconnecting device.
Install the instrument according to the enclosure protection provided. This
instrument does not protect against the ingress of water. This instrument
protects against finger access to hazardous parts within the enclosure.
14
Chapter 2, "Using the Multi-Wave-
Chapter 7, "Specifications and Regulatory Information"
for
Advertisement
Table of Contents
