Keysight Technologies 86120B User Manual page 167

Syntax
Attribute Summary
Description
Query Response
Syntax
Attribute Summary
POINts?
Queries the number of points in the data set.
:CALCulate2:POINts?
Preset State: unaffected
*RST State: unaffected
SCPI Compliance: instrument specific
Query Only
This is the number of points that will be returned by the CALC2:DATA? query.
For example, if six laser lines are located:
+6
PTHReshold
Sets the peak threshold limit used by the instrument to determine valid laser line
peaks.
:CALCulate2:PTHReshold{?| {<integer> | MINimum | MAXimum | DEFault}}
<integer> represents logarithmic units in dB. Valid range is 0 to 40.
Constant Value
MINimum 0 dB
MAXimum 40 dB
DEFault 10 dB
Non-sequential command
Preset State: 10 dB
*RST State: 10 dB
SCPI Compliance: instrument specific
Programming Commands
CALCulate2 Subsystem
165