Query Response
Example
Syntax
Description
operations have completed before continuing the program. By following a command
with an *OPC? query and an ENTER statement, the program will pause until the
response (ASCII "1") is returned by the instrument.
Be sure the computer's timeout limit is at least two seconds, since some of the
Keysight 86120B commands take approximately one second to complete.
1
OUTPUT 720;"*OPC?"
ENTER 720;Op$
*RCL
This command recalls a saved instrument state.
*RCL <integer>
<integer> range is 1 to 4.
For a description of an instrument state, see *SAV command.
Programming Commands
Common Commands
137