Table of Contents
Advertisement
Notices
This document contains propri-
etary information that is pro-
tected by copyright. All rights
are reserved.
No part of this document may
reproduced in (including elec-
tronic storage and retrieval or
translation into a foreign lan-
guage) without prior agreement
and written consent from Key-
sight Technologies Deutschland
GmbH as governed by United
States and international copy-
wright laws.
© Copyright 2000 – 2014 by:
Keysight Technologies Deutsch-
land GmbH
Herrenberger Str. 130
71034 Böblingen
Germany
Subject Matter
The material in this document is
subject to change without notice.
Keysight Technologies makes no
warranty of any kind with regard
to this printed material, includ-
ing, but not limited to, the
implied warranties of merchant-
ability and fitness for a particu-
lar purpose.
Keysight Technologies shall not
be liable for errors contained
herein or for incidental or conse-
quential damages in connection
with the furnishing, perfor-
mance, or use of this material.
Warranty
This Keysight Technologies
instrument product is warranted
against defects in material and
workmanship for a period of one
year from date of shipment.
During the warranty period,
Keysight will, at its option,
either repair or replace products
that prove to be defective.
For warranty service or repair,
this product must be returned to
a service facility designated by
Keysight. Buyer shall prepay
shipping charges to Keysight
and Keysight shall pay shipping
charges to return the product to
Buyer. However, Buyer shall
pay all shipping charges, duties,
and taxes for products returned
to Keysight from another coun-
try. Keysight warrants that its
software and firmware desig-
nated by Keysight for use with
an instrument will execute its
programming instructions when
properly installed on that instru-
ment. Keysight does not war-
rant that the operation of the
instrument, software, or firm-
ware will be uninterrupted or
error free.
Limitation of Warranty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate mainte-
nance by Buyer, Buyer-supplied
software or interfacing, unautho-
rized modification or misuse,
operation outside of the environ-
mental specifications for the
product, or improper site prepa-
ration or maintenance.
No other warranty is expressed
or implied. Keysight Technolo-
gies specifically disclaims the
implied warranties of Merchant-
ability and Fitness for a Particu-
lar Purpose.
Exclusive Remedies
The remedies provided herein
are Buyer's sole and exclusive
remedies. Keysight Technolo-
gies shall not be liable for any
direct, indirect, special, inciden-
tal, or consequential damages
whether based on contract, tort,
or any other legal theory.
Assistance
Product maintenance agree-
ments and other customer assis-
tance agreements are available
for Keysight Technologies prod-
ucts. For any assistance contact
your nearest Keysight Technolo-
gies Sales and Service Office.
Certification
Keysight Technologies certifies
that this product met its pub-
lished specifications at the time
of shipment from the factory.
Keysight Technologies further
certifies that its calibration mea-
surements are traceable to the
2
United States National Institute
of Standards and Technology,
NIST to the extent allowed by
the Institutes's calibration facil-
ity, and to the calibration facili-
ties of other International
Standards Organization mem-
bers.
ISO 9001 Certification
Produced to ISO 9001 interna-
tional quality system standard as
part of our objective of continu-
ally increasing customer satis-
faction through improved
process control.
Safety Notices
CAUTION
Caution denotes a hazard. It
calls attention to a procedure
which, if not correctly per-
formed or adhered to, could
result in damage to or destruc-
tion of the product. Do not pro-
ceed beyond a caution sign until
the indicated conditions are fully
understood and met.
WARNING
Warning denotes a hazard. It
calls attention to a procedure
which, if not correctly per-
formed or adhered to, could
result in injury or loss of life. Do
not proceed beyond a warning
sign until the indicated condi-
tions are fully understood and
met.
The instruction manual
symbol. The product is
marked with this warn-
ing symbol when it is
necessary for the user to
refer to the instructions
in the manual.
The laser radiation sym-
bol. This warning sym-
bol is marked on
products which have a
laser output.
The AC symbol is used
to indicate the required
nature of the line mod-
ule input power.
|
The ON symbols are
used to mark the posi-
tions of the instrument
power line switch.
m
The OFF symbols
are used to mark the
positions of the instru-
ment power line switch.
The CE mark is a regis-
tered trademark of the
European Community.
The CSA mark is a reg-
istered trademark of the
Canadian Standards
Association.
The C-Tick mark is a
registered trademark of
the Australian Spec-
trum Management
Agency.
This text denotes the
ISM1-A
instrument is an Indus-
trial Scientific and Med-
ical Group 1 Class A
product.
Typographical Conventions.
The following conventions are
used in this book:
Key type for keys or text located
on the keyboard or instrument.
Softkey type for key names that
are displayed on the instrument's
screen.
Display type for words or char-
acters displayed on the com-
puter's screen or instrument's
display.
for words or characters
User type
that you type or enter.
Emphasis type for words or
characters that emphasize some
point or that are used as place
holders for text that you type.
Edition 3:
86120-90B03: November 2014
Edition 2:
86120-90B03: July 2004
Edition 1:
Advertisement
Table of Contents
