Table of Contents
Advertisement
Syntax
Attribute Summary
Description
Programming Commands
CALCulate3 Subsystem
DELTa:REFerence:WNUMber
Selects the reference laser line for delta calculations.
:CALCulate3:DELTa:REFerence:WNUMber{?| {<real> | MINimum | MAXimum}}
<real> is a wave number value that is within the following limits:
Constant
Description
MINimum
6,061 cm
MAXimum
14,286 cm
Preset State: 14,286 cm
*RST State: 14,286 cm
SCPI Compliance: instrument specific
The reference will be the laser line at the wave number closest to the wave number
entered. Subsequent measurements will use the wave number closest to the refer-
ence wave number used for the previous measurement.
The query returns the current wave number of the reference laser line. The default
units for the <real> parameter are m
182
-1
-1
1 (700 nm)
–
1 (700 nm)
–
.
–1
Advertisement
Table of Contents
