Table of Contents
Advertisement
Table 4-11. Programming Commands (5 of 5)
Command
Codes: S indicates a standard SCPI command. I indicates an instrument specific command.
:SYSTem:HELP:HEADers?
:SYSTem:PRESet
:SYSTem:VERSion
TRIGger Subsystem
:ABORt
:INITiate:IMMediate
:INITiate:CONTinuous
UNIT Subsystem
:UNIT[:POWer]
Description
Queries an ASCII listing of all Keysight 86120B remote
commands.
Performs the equivalent of a front-panel PRESET key
press.
Queries the version of SCPI with which this instrument is
compliant.
Stops the current measurement sequence.
Places the instrument into the initiated state and initiates a
new measurement sequence.
Sets the instrument for single or continuous measurement.
Sets the power units to watts (linear) or dBm
(logarithmic).
Programming
Lists of Commands
Code
I
S
S
S
S
S
S
127
Advertisement
Table of Contents
