Gbic_Security_Unique Messages - Cisco 3110 Message Manual

Chapter 2 Message and Recovery Procedures

GBIC_SECURITY_UNIQUE Messages

This section contains the 10-Gigabit Ethernet module security messages that identify whether the
module is unique.
The Catalyst Switch Module 3110X supports only 10-Gigabit Ethernet modules and do not support
Note
GBIC modules. Although the error message text refers to GBIC interfaces and modules, the messages
from the switch actually refer to the 10-Gigabit Ethernet module interfaces and modules.
Error Message GBIC_SECURITY_UNIQUE-3-DUPLICATE_GBIC: GBIC interface [dec]/[dec] is
a duplicate of GBIC interface [dec]/[dec].
Note
Error Message GBIC_SECURITY_UNIQUE-4-DUPLICATE_SN: GBIC interface [dec]/[dec] has
the same serial number as another GBIC interface.
Note
OL-12191-01
This message applies only to the Catalyst Switch Module 3110X.
Explanation The SFP module was identified as a Cisco GBIC or SFP module, but its vendor ID and
serial number match that of another interface on the system. The first [dec]/[dec] is the interface of
the duplicate GBIC or SPF module, and the second [dec]/[dec] is the interface of the existing
module.
Cisco GBIC or SFP modules are assigned unique serial numbers. Verify that
Recommended Action
the module was obtained from Cisco or from a supported vendor.
This message applies only to the Catalyst Switch Module 3110X.
The SFP module was identified as a Cisco SFP module, but its serial number matches
Explanation
that of another interface on the system. [dec]/[dec] is the interface in which the duplicate module is
installed.
Cisco SFP modules are assigned unique serial numbers. Verify that the module
Recommended Action
was obtained from Cisco or from a supported vendor.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
GBIC_SECURITY_UNIQUE Messages
2-37