Cisco 3110 Message Manual page 79

Chapter 2 Message and Recovery Procedures
Error Message PM-2-NOMEM: Not enough memory available for [chars].
Explanation
specified operation. [chars] is the port manager operation.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message PM-2-VLAN_ADD: Failed to add VLAN [dec] - [chars].
Explanation
[dec] is the VLAN ID, and [chars] specifies the reason for the failure.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Error Message PM-3-INTERNALERROR: Port Manager Internal Software Error ([chars]:
[chars]: [dec]: [chars]).
Explanation
problem for technical support. The first [chars] is the error message, and the second [chars] is the
filename. [dec] is the line number, and the last [chars] is the function name.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Error Message PM-4-BAD_APP_ID: an invalid application id ([dec]) was detected.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
OL-12191-01
The port manager subsystem could not obtain the memory it needed to initialize the
Copy the message exactly as it appears on the console or in the system log.
1-6.
The software failed to add the VLAN to the VLAN Trunking Protocol (VTP) database.
Copy the message exactly as it appears on the console or in the system log.
1-6.
An internal software error occurred in the port manager. The parameters identify the
Copy the message exactly as it appears on the console or in the system log.
The port manager detected an invalid request. [dec] is the application ID.
Copy the message exactly as it appears on the console or in the system log.
1-6.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
"Error Message Traceback Reports" section on page
PM Messages
"Error Message Traceback
"Error Message Traceback
1-6.
"Error Message Traceback
2-63