Platform _Ipc Messages - Cisco 3110 Message Manual

Catalyst switch module for ibm bladecenter system
Hide thumbs Also See for 3110:
Table of Contents

Advertisement

Chapter 2
Message and Recovery Procedures
Error Message PLATFORM_HPLM-6-LABEL_COMPLETE: VRF Label compaction complete.
Error Message PLATFORM_HPLM-6-LABEL_FAILED: VRF Label compaction failed.
Error Message PLATFORM_HPLM-6-LABEL_START: VRF Label compaction started.

PLATFORM _IPC Messages

This section contains the Inter-Process Communication (IPC) protocol messages. The IPC protocol
handles communication between the stack master switch and stack member switches.
Error Message PLATFORM_IPC-3-COMMON: [chars].
Note
Error Message PLATFORM_IPC-3-MASTER: [chars].
Note
OL-12191-01
The VRF label compaction process has successfully completed.
Explanation
No action is required.
Recommended Action
The VRF label compaction process has failed.
Explanation
No action is required.
Recommended Action
The VRF label compaction process has started.
Explanation
No action is required.
Recommended Action
This message applies only to the Catalyst Switch Module 3110.
There has been an IPC failure. [chars] describes the error message.
Explanation
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
This message applies only to the Catalyst Switch Module 3110.
There has been an IPC failure on the stack master. [chars] describes the error message.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
PLATFORM _IPC Messages
1-6.
1-6.
2-51

Advertisement

Table of Contents
loading

This manual is also suitable for:

3112

Table of Contents