Cisco 3110 Message Manual page 116

SW_VLAN Messages
Error Message SW_VLAN-4-BAD_VLAN_CONFIGURATION_FILE_VERSION: VLAN configuration
file contained unknown file version [dec].
Explanation
file version number, which might mean an attempt to regress to an older version of the VLAN
manager software. [dec] is the file version number.
Recommended Action
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting IBM, see the
Reports" section on page
Error Message SW_VLAN-4-BAD_VLAN_TIMER_ACTIVE_VALUE: Encountered incorrect VLAN
timer active value [chars].
Explanation
been inactive or as inactive when it should have been active. [chars] is the VLAN timer active value.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Error Message SW_VLAN-4-EXT_VLAN_INTERNAL_ERROR: Extended VLAN manager received an
internal error [dec] from [chars] [chars].
Explanation
VLAN configuration software. [dec] is the error code. The first [chars] is the function, and the
second [chars] describes the error code.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Reports" section on page
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-100
The VLAN configuration file read by the VLAN manager contained an unrecognized
Find out more about the error by using the show tech-support privileged EXEC
1-6.
Because of a software error, a VLAN timer was detected as active when it should have
Copy the message exactly as it appears on the console or in the system log.
An unexpected error code was received by the VLAN manager from the extended-range
Copy the message exactly as it appears on the console or in the system log.
1-6.
Chapter 2
"Error Message Traceback Reports" section on page
Message and Recovery Procedures
"Error Message Traceback
1-6.
"Error Message Traceback
OL-12191-01