Supq Messages - Cisco 3110 Message Manual

Chapter 2 Message and Recovery Procedures

SUPQ Messages

This section contains the supervisor queue messages. These messages are related to CPU send and
receive queues.
Error Message SUPQ-3-THROTTLE_CPU_QUEUE: Invalid application ID [dec] used for
throttling.
Error Message SUPQ-4-CPUHB_RECV_STARVE: [chars].
Error Message SUPQ-4-CPUHB_SLOW_TRANSMIT: [chars].
Error Message SUPQ-4-CPUHB_TX_FAIL: [chars].
OL-12191-01
Explanation An application has passed an invalid application ID for throttle check. [dec] is the
internal application identifier.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
The system has detected that messages directed to the CPU are delayed. [chars] is the
Explanation
detailed error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
The system is warning you about a slowdown of the transmit interface. [chars] is the
Explanation
detailed error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
The system is warning you about the sending interface discarding the heartbeat
Explanation
message. [chars] is the detailed error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
SUPQ Messages
1-6.
1-6.
1-6.
1-6.
2-93