Cisco 3110 Message Manual page 122

Catalyst switch module for ibm bladecenter system
Hide thumbs Also See for 3110:
Table of Contents

Advertisement

TCAMMGR Messages
Error Message TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int]
failed.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Error Message TCAMMGR-3-REGION_ERROR: cam region [dec] is invalid.
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Error Message TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair.
Explanation
predetermined set of masks is allowed in a region. The first [dec] is the region, and the second [dec]
is the mask.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-106
A CAM entry being moved from one index to another failed. [int] is the index value.
Copy the message exactly as it appears on the console or in the system log.
The CAM region is not valid. [dec] is the region.
Copy the message exactly as it appears on the console or in the system log.
A caller attempted to install an entry with an invalid mask for the region. Only a
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
Message and Recovery Procedures
1-6.
1-6.
1-6.
OL-12191-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

3112

Table of Contents