Hardware Messages - Cisco 3110 Message Manual

HARDWARE Messages

HARDWARE Messages
This section contains hardware messages.
Error Message HARDWARE-2-FAN_ERROR: Fan [chars] Failure
Error Message HARDWARE-2-FAN_ERROR: Fan Failure.
Error Message HARDWARE-2-THERMAL_WARNING: Temperature has reached warning threshold.
Error Message HARDWARE-3-ASICNUM_ERROR: Port-ASIC number [dec] is invalid.
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-38
Explanation The switch fan is not working. [chars] is the fan name.
This is a hardware failure. The fan might recover automatically. If the fan
Recommended Action
failure persists, copy the message exactly as it appears on the console or in the system log. Research
and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for
similar reported problems. If you still require assistance, open a case with the TAC, or contact your
Cisco technical support representative, and provide the representative with the gathered information.
For more information about these online tools and about contacting Cisco, see the
Traceback Reports" section on page
Explanation The fan is not working.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The temperature sensor valve inside the switch reached the warning threshold. The
Explanation
switch can function normally until the temperature reaches the critical threshold.
The external temperature is high. Reduce the temperature in the room.
Recommended Action
Explanation The port ASIC number used is invalid. Each port ASIC is identified by an ID. [dec] is
the ASIC number.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Chapter 2
1-6.
1-6.
"Error Message Traceback Reports" section on page
Message and Recovery Procedures
"Error Message
"Error
1-6.
OL-12191-01