Platform_Vlan Messages - Cisco 3110 Message Manual

Chapter 2 Message and Recovery Procedures

PLATFORM_VLAN Messages

This section contains platform VLAN messages.
Error Message PLATFORM_VLAN-3-LOCK_FAIL: Failed to lock vlan-id [dec], associated
mapped vlan id value [dec].
Error Message PLATFORM_VLAN-3-MVID_ERROR: Mapped Vlan ID value [dec] associated with
vlan-id [dec] is invalid.
Error Message PLATFORM_VLAN-3-UNLOCK_FAIL: Failed to unlock vlan-id [dec],
associated mapped vlan id value [dec].
OL-12191-01
The VLAN lock operation failed. This can occur if the VLAN is already active in the
Explanation
system or if the VLAN ID is not active. The first [dec] is the VLAN ID, and the second [dec] is the
mapped-vlan-id (MVID).
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
An active VLAN is not correctly associated with a mapped-vlan-id (MVID). The first
Explanation
[dec] is the VLAN ID, and the second [dec] is the MVID.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
The switch failed to unlock a VLAN ID. The most likely cause is that the VLAN is
Explanation
already unlocked. The first [dec] is the VLAN ID, and the second [dec] is the MVID.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
PLATFORM_VLAN Messages
1-6.
1-6.
1-6.
2-61