Cisco 3110 Message Manual page 64

Catalyst switch module for ibm bladecenter system
Hide thumbs Also See for 3110:
Table of Contents

Advertisement

PLATFORM Messages
Error Message PLATFORM-3-PW_REC_HRPC_BAD_LENGTH: Received incompatible length
(=[dec]) in set-password-recovery HRPC message from box [dec].
Note
Explanation
HRPC message. This can be caused by a stack operating with incompatible software versions on
different stack members. The first [dec] is the length and the second [dec] is the switch.
Recommended Action
problem persists, find out more about the error by using the show tech-support privileged EXEC
command and by copying the error message exactly as it appears on the console or system log and
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For
more information about these online tools and about contacting IBM, see the
Reports" section on page
Error Message PLATFORM-3-PW_REC_HRPC_NOT_ON_MASTER: Set-password-recovery HRPC msg
from box [dec] received on master.
Note
Explanation
should be received on stack member switches only. [dec] is the switch.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Error Message PLATFORM-3-PW_REC_HRPC_ONLY_ON_MASTER: Get-password-recovery HRPC msg
from box [dec] received on member.
Note
Explanation
messages should only be received by the stack master. [dec] is the switch.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-48
This message applies only to the Catalyst Switch Module 3110.
The system received an incompatible length parameter in the set-password-recovery
Make sure that all stack members are running compatible software images. If the
1-6.
This message applies only to the Catalyst Switch Module 3110.
The stack master has received a set-password-recovery HRPC message. These messages
Copy the message exactly as it appears on the console or in the system log.
This message applies only to the Catalyst Switch Module 3110.
A stack member switch has received a get-password-recovery HRPC message. These
Copy the message exactly as it appears on the console or in the system log.
Chapter 2
"Error Message Traceback Reports" section on page
"Error Message Traceback Reports" section on page
Message and Recovery Procedures
"Error Message Traceback
1-6.
1-6.
OL-12191-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

3112

Table of Contents