Sw_Vlan Messages; Switch_Qos_Tb Messages - Cisco 3110 Message Manual

SWITCH_QOS_TB Messages

SWITCH_QOS_TB Messages
This section contains the QoS trusted boundary (TB) messages.
Error Message SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: [chars] detected on port
[chars], port's configured trust state is now operational.
Error Message SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: [chars] no longer detected on port
[chars], operational port trust state is now untrusted.

SW_VLAN Messages

This section contains the VLAN manager messages. The VLAN manager receives information from the
VTP and enables the proper VLAN membership on all interfaces through the port manager.
Error Message SW_VLAN-3-MALLOC_FAIL: Failed to allocate [dec] bytes
Error Message SW_VLAN-3-VLAN_PM_NOTIFICATION_FAILURE: VLAN Manager synchronization
failure with Port Manager over [chars].
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
2-98
A trusted boundary detected a device matching the trusted device setting for the port and
Explanation
has modified the port trust state. The first [chars] is the trusted device, and the second [chars] is the
port.
No action is required.
Recommended Action
Explanation A trusted boundary lost contact with a trusted device and has set the port trust state to
untrusted. The first [chars] is the trusted device, and the second [chars] is the port
No action is required.
Recommended Action
Explanation Memory allocation failed. [dec] is the number of bytes.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error using the Output Interpreter. Use the Bug Toolkit to look
for similar reported problems. If you still require assistance, open a case with the TA C, or contact
your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The VLAN manager dropped a notification from the port manager because of a lack of
Explanation
ready pool space. [chars] is the type of port manager notification.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
Chapter 2
1-6.
"Error Message Traceback Reports" section on page
Message and Recovery Procedures
"Error
1-6.
OL-12191-01