Edge-Core ECS2100-10T Reference Manual page 328

Chapter 10
| Access Control Lists
IPv4 ACLs
no {permit | deny} [protocol-number | udp]
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[dscp dscp] [precedence precedence]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
{permit | deny} tcp
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[dscp dscp] [precedence precedence]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
[control-flag control-flags flag-bitmask]
[time-range time-range-name]
no {permit | deny} tcp
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[dscp dscp] [precedence precedence]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
[control-flag control-flags flag-bitmask]
protocol-number – A specific protocol number. (Range: 0-255)
source – Source IP address.
destination – Destination IP address.
address-bitmask – Decimal number representing the address bits to match.
host – Keyword followed by a specific IP address.
dscp – DSCP priority level. (Range: 0-63)
precedence – IP precedence level. (Range: 0-7)
sport – Protocol
dport – Protocol
port-bitmask – Decimal number representing the port bits to match.
(Range: 0-65535)
control-flags – Decimal number (representing a bit string) that specifies flag
bits in byte 14 of the TCP header. (Range: 0-63)
flag-bitmask – Decimal number representing the code bits to match.
time-range-name - Name of the time range. (Range: 1-16 characters)
Default Setting
None
Command Mode
Extended IPv4 ACL
4. Includes TCP, UDP or other protocol types.
4
source port number. (Range: 0-65535)
4
destination port number. (Range: 0-65535)
– 328 –