Lldp Dot1-Tlv Pvid; Lldp Dot1-Tlv Vlan-Name - Edge-Core ECS2100-10T Reference Manual

Command Usage
This option advertises the port-based protocol VLANs configured on this interface
(see
Example

lldp dot1-tlv pvid

This command configures an LLDP-enabled port to advertise its default VLAN ID.
Use the no form to disable this feature.
Syntax
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The port's default VLAN identifier (PVID) indicates the VLAN with which untagged
or priority-tagged frames are associated (see the
Example
lldp dot1-tlv
This command configures an LLDP-enabled port to advertise its VLAN name. Use
vlan-name the no form to disable this feature.
Syntax
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
"Configuring Protocol-based VLANs" on page
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#
[no] lldp dot1-tlv pvid
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv pvid
Console(config-if)#
[no] lldp dot1-tlv vlan-name
– 615 –
Chapter 24
| LLDP Commands
475).
switchport native vlan command).