History; Media-Type - Edge-Core ECS2100-10T Reference Manual

Chapter 11
| Interface Commands
Interface Configuration

history

media-type

This command configures a periodic sampling of statistics, specifying the sampling
interval and number of samples. Use the no form to remove a named entry from
the sampling table.
Syntax
history name interval buckets
no history name
name - A symbolic name for this entry in the sampling table. (Range: 1-32
characters)
interval - The interval for sampling statistics. (Range: 1-1440 minutes.
buckets - The number of samples to take. (Range: 1-96)
Default Setting
15min - 15 minute interval, 96 buckets
1day - 1 day interval, 7 buckets
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
This example sets a interval of 15 minutes for sampling standard statistical values
on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#history 15min 15 10
Console(config-if)#
This command forces the transceiver mode to use for SFP/SFP+ ports, or
the port type to use for combination RJ-45/SFP ports. Use the no form to
restore the default mode.
Syntax
media-type {sfp-forced [mode] | sfp-preferred-auto}
no media-type
sfp-forced - Forces transceiver mode for the SFP/SFP+ port.
mode
1000sfp - Always uses 1000BASE SFP mode.
100fx - Always uses 100BASE-FX mode.
Default Setting
SFP/SFP+ ports: None
– 354 –