Edge-Core ECS2100-10T Reference Manual page 546

Chapter 23
| Multicast Filtering Commands
IGMP Snooping
Table 113: IGMP Snooping Commands
Command
ip igmp snooping
tcn-query-solicit
ip igmp snooping
unregistered-data-flood
ip igmp snooping
unsolicited-report-interval
ip igmp snooping version
ip igmp snooping
version-exclusive
ip igmp snooping vlan
general-query-suppression
ip igmp snooping vlan
immediate-leave
ip igmp snooping vlan last-
memb-query-count
ip igmp snooping vlan last-
memb-query-intvl
ip igmp snooping vlan mrd
ip igmp snooping vlan
proxy-address
ip igmp snooping vlan
proxy-reporting
ip igmp snooping vlan
query-interval
ip igmp snooping vlan
query-resp-intvl
ip igmp snooping vlan
static
ip igmp snooping
vlan version
ip igmp snooping
vlan version-exclusive
clear ip igmp snooping
groups dynamic
clear ip igmp snooping
statistics
show ip igmp snooping
show ip igmp snooping
group
(Continued)
Function
Sends an IGMP Query Solicitation when a Spanning Tree
topology change occurs
Floods unregistered multicast traffic into the attached
VLAN
Specifies how often the upstream interface should
transmit unsolicited IGMP reports (when proxy reporting is
enabled)
Configures the IGMP version for snooping
Discards received IGMP messages which use a version
different to that currently configured
Suppresses general queries except for ports attached to
downstream multicast hosts
Immediately deletes a member port of a multicast service
if a leave packet is received at that port and immediate-
leave is enabled for the parent VLAN
Configures the number of IGMP proxy query messages that
are sent out before the system assumes there are no local
members
Configures the last-member-query interval
Sends multicast router solicitation messages
Configures a static address for proxy IGMP query and
reporting
Enables IGMP Snooping with Proxy Reporting
Configures the interval between sending IGMP general
queries
Configures the maximum time the system waits for a
response to general queries
Adds an interface as a member of a multicast group
Configures the IGMP version for snooping
Discards received IGMP messages which use a version
different to that currently configured
Clears multicast group information dynamically learned
through IGMP snooping
Clears IGMP snooping statistics
Shows the IGMP snooping, proxy, and query configuration PE
Shows known multicast group, source, and host port
mapping
– 546 –
Mode
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
PE
PE
PE