Mac-Authentication Reauth-Time - Edge-Core ECS2100-10T Reference Manual

mac-authentication
reauth-time
◆
This command is different from configuring static addresses with the
address-table static
addresses when using a mask, and then to assign these addresses to one or
more ports with the
◆
Up to 64 filter tables can be defined.
◆
There is no limitation on the number of entries that can entered in a filter table.
Example
Console(config)#network-access mac-filter 1 mac-address 11-22-33-44-55-66
Console(config)#
Use this command to set the time period after which a connected MAC address
must be re-authenticated. Use the no form of this command to restore the default
value.
Syntax
mac-authentication reauth-time seconds
no mac-authentication reauth-time
seconds - The reauthentication time period. (Range: 120-1000000 seconds)
Default Setting
1800
Command Mode
Global Configuration
Command Usage
◆
The reauthentication time is a global setting and applies to all ports.
◆
When the reauthentication time expires for a secure MAC address it is
reauthenticated with the RADIUS server. During the reauthentication process
traffic through the port remains unaffected.
Example
Console(config)#mac-authentication reauth-time 300
Console(config)#
Chapter 9
Network Access (MAC Address Authentication)
command in that it allows you configure a range of
network-access mac-filter
– 267 –
| General Security Measures
mac-
command.