Aaa Accounting Exec - Edge-Core ECS2100-10T Reference Manual

aaa accounting exec

This command enables the accounting of requested Exec services for network
access. Use the no form to disable the accounting service.
Syntax
aaa accounting exec {default | method-name}
start-stop group {radius | tacacs+ |server-group}
no aaa accounting exec {default | method-name}
default - Specifies the default accounting method for service requests.
method-name - Specifies an accounting method for service requests.
(Range: 1-64 characters)
start-stop - Records accounting from starting point and stopping point.
group - Specifies the server group to use.
radius - Specifies all RADIUS hosts configure with the
host command.
tacacs+ - Specifies all TACACS+ hosts configure with the
host command.
server-group - Specifies the name of a server group configured with the
aaa group server
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
◆
This command runs accounting for Exec service requests for the local console
and Telnet connections.
◆
Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified RADIUS or TACACS+ servers,
and do not actually send any information to the servers about the methods to
use.
Example
Console(config)#aaa accounting exec default start-stop group tacacs+
Console(config)#
Chapter 8
command. (Range: 1-64 characters)
– 217 –
| Authentication Commands
AAA
radius-server
tacacs-server