Authorization Commands - Edge-Core ECS2100-10T Reference Manual

Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
authorization
This command applies an authorization method to entered CLI commands. Use the
no form to disable authorization for entered CLI commands.
commands
Syntax
authorization commands level {default | list-name}
no authorization commands level
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#authorization commands 15 default
Console(config-line)#
level - The privilege level for executing commands. (Range: 0-15)
default - Specifies the default method list created with the

authorization commands

list-name - Specifies a method list created with the
commands command.
– 223 –
Chapter 8
| Authentication Commands
command.
AAA
aaa
aaa authorization