web-auth system-
This command globally enables web authentication for the switch. Use the no form
to restore the default.
auth-control
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and
must be enabled for the web authentication feature to be active.
Example
web-auth
This command enables web authentication for an interface. Use the no form to
restore the default.
Syntax
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
Both
be enabled for the web authentication feature to be active.
Example
[no] web-auth system-auth-control
Console(config)#web-auth system-auth-control
Console(config)#
[no] web-auth
web-auth system-auth-control
Console(config-if)#web-auth
Console(config-if)#
– 279 –
Chapter 9
| General Security Measures
web-auth
for the switch and web-auth for a port must
Web Authentication
for an interface