Name; Revision - Edge-Core ECS2100-10T Reference Manual

Example
Console(config-mstp)#mst 1 vlan 2-5
Console(config-mstp)#

name

This command configures the name for the multiple spanning tree region in which
this switch is located. Use the no form to clear the name.
Syntax
name name
name - Name of multiple spanning tree region. (Range: 1-32 alphanumeric
characters)
Default Setting
Switch's MAC address
Command Mode
MST Configuration
Command Usage
The MST region name and revision number
unique MST region. A bridge (i.e., spanning-tree compliant device such as this
switch) can only belong to one MST region. And all bridges in the same region must
be configured with the same MST instances.
Example
Console(config-mstp)#name R&D
Console(config-mstp)#
Related Commands

revision (441)

revision
This command configures the revision number for this multiple spanning tree
configuration of this switch. Use the no form to restore the default.
Syntax
revision number
number - Revision number of the spanning tree. (Range: 0-65535)
Default Setting
0
Command Mode
MST Configuration
Chapter 18
(page
– 441 –
| Spanning Tree Commands
441) are used to designate a