Show Logging; Table 21: Show Logging Flash/Ram - Display Description - Edge-Core ECS2100-10T Reference Manual

show logging

This command displays the configuration settings for logging messages to local
switch memory, to an SMTP event handler, or to a remote syslog server.
Syntax
show logging {command | flash | ram | sendmail | trap}
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message level for
flash memory is "errors" (i.e., default level 3 - 0), and the message level for RAM is
"debugging" (i.e., default level 7 - 0).
Console#show logging flash
Global Configuration:
Syslog Logging
Flash Logging Configuration:
History Logging in Flash : Level Errors (3)
Console#show logging ram
Global Configuration:
Syslog Logging
Ram Logging Configuration:
History Logging in RAM
Console#

Table 21: show logging flash/ram - display description

Field
Syslog Logging
History Logging in Flash
History Logging in RAM
command - Stores CLI command execution records in syslog RAM and
flash.
flash - Displays settings for storing event messages in flash memory
(i.e., permanent memory).
ram - Displays settings for storing event messages in temporary RAM
(i.e., memory flushed on power reset).
sendmail - Displays settings for the SMTP event handler
trap - Displays settings for the trap function.
: Enabled
: Enabled
: Level Debugging (7)
Description
Shows if system logging has been enabled via the
command.
The message level(s) reported based on the
The message level(s) reported based on the
– 131 –
Chapter 4
| System Management Commands
logging history
logging history
Event Logging
(page 136).
logging on
command.
command.