Show Queue Mode; Show Queue Weight - Edge-Core ECS2100-10T Reference Manual

show queue mode

show queue weight

port. (Note that if the output port is an untagged member of the associated
VLAN, these frames are stripped of all VLAN tags prior to transmission.)
Example
The following example shows how to set a default priority on port 3 to 5:
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config-if)#
Related Commands
show interfaces switchport (365)
This command shows the current queue mode.
Command Mode
Privileged Exec
Example
Console#show queue mode
Unit Port queue mode
---- ---- ---------------
1 1 Weighted Round Robin
...
This command displays the weights used for the weighted queues.
Command Mode
Privileged Exec
Example
Console#show queue weight
Information of Eth 1/1
Queue ID Weight
-------- ------
0 1
1 2
2 4
3 6
4 8
5 10
6 12
7 14
...
Chapter 21
– 525 –
| Class of Service Commands
Priority Commands (Layer 2)