Global Chassis Configuration - Imagine communications Selenio BNP 2xr User Manual

System Configuration

- Global Chassis Configuration

Global Chassis Configuration
Use the Global tab screen
Note: This screen provides tools you use to establish system redundancy. See also
Redundancy"
BNP Element Manager Configuration tab -> Global tab screen.
Menu Path
Figure 18. Global tab screen
1. At the Global tab screen, use guidelines from the following tables to set parameters for the BNP
system:
Table 12, "System Time Source—Global Configuration," on page 38.
-
Table 13, "Time Zone, Name, Log Address—Global Configuration," on page 38.
-
Table 56, "Chassis Redundancy Parameters," on page 95.
-
Table 14, "Virtual IP Address Configuration—Global Configuration," on page 39.
-
Table 15, "Advanced System Parameters—Global Configuration," on page 39.
-
Table 16, "Advanced DPI Parameters—Global Configuration," on page 41.
-
Table 17, "PID Display Format—Global Configuration," on page 41.
-
Selenio TM BNP User Guide, Release 3.7.1
(Figure 18) to view and configure parameters applicable to the BNP system.
for details pertinent to managing active and standby BNPs.
Chapter 5, "System
37