Grooming and PSIP
- Working with PIDs
Unreferenced PID Mapping
Note:
You cannot change an unreferenced output program to a referenced output program (and vice-
versa) during a regroom. You must first delete the output program (and grooming) to change this
setting.
1. At the Grooming Mapping tab page, right-click on an output port and select Create Output
Transport Stream from the popup menu to present the Create Output Stream dialog
(Figure
116).
Figure 116. Unreferenced PID Mapping
2. Enter the Destination IP address and the UDP Port number, choose DVB as the TS Type and click
OK.
3. Drag the ghost program from the input panel and drop it on the DVB transport stream you just
created. The Configure Program Mapping window
Selenio
TM
BNP User Guide, Release 3.7.1
(Figure
117) is now presented.
172